Powercan Etch Primer is a 1K etch primer in ready to use aerosol form. It is used for priming bare metal surfaces to promote adhesion of paint and prevent the steel surface from rusting. Powercan Etch Primer is chromate free. It is typically applied to promote adhesion on rub-through areas prior to painting, on bare metal substrates and over bare seams before application of sealant. Powercan Etch Primer can be applied to the following surfaces:- Bare steel. Aluminium. Galvanized and Zinc coated steels. Fully cured paint. Polyester bodyfillers and G.R.P.
Aerosol Stonechip Grey - 500ml
Double Sided Foam Tape - 50mm x 5m
Paintable Adhesive PU Sealer Grey - 310ml
Mutton Cloth - Single Roll - 800g
Siliocone Remover Degreaser - Slow - 1L
Wet or Dry Abrasive Sheets -- 180 grit - 230 x 280mm - Single Sheet